News Center

Tubular Motor Factory Introduces The Tricks Of Installing Electric Curtains

Update:01-09-2021
Summary:

Tubular Motor Factory introduces the installation skill […]

Tubular Motor Factory introduces the installation skills of electric curtains:

1. Perform tracking, positioning, and measurement. The accuracy of positioning is the key to the installation of electric curtain rails. It should be noted that the total length of the track is the sum of the motor, track, and auxiliary gearbox.

 

2. Install the lifting clip, rotate the clip 90 degrees to connect with the electric opening and closing curtain track, and then use the self-tapping screw to install the lifting clip on the top plate. If it is a concrete structure, it needs to be fixed with expansion screws.

 

3. Connect the motor to the track, put the motor in the main gearbox, and then rotate it 90 degrees clockwise. The interface between the flat shaft of the main gearbox and the motor should match. After rotating in place, push the insert into the gearbox to the limit position, and it will automatically lock at this time.

 

4. Adjust the motor program, the back end of the motor is equipped with a set of gears and micro switch devices. The motor wiring needs to rotate forward and reverse to realize the self-positioning of the curtain opening and closing stroke.